Welcome Michigan Residential Water Customers
This page serves as an information page to help address any confusions and answer any questions that you may have. The concept of cross connection control is complex and can be confusing, but is not only required by law but helps to keep your drinking water safe. On this page you will find the Frequently Asked Questions, Certifed Device Tester list and other resources to help you better understand what exactly cross connection control is.
Locating a Plumbing Contractor
Only plumbing contractors that have been registered with CCRA are able to submit device tests into CCRA's system. Plumbing contractors are required to be ASSE 5110 certified to test devices in the state of Michigan. If you don't see your plumbing contractor on the list they can registered with CCRA at no cost to be able to submit devices into communities utilizing CCRA's system. But they need to meet the state/local requirements and have their testing equipment calibrated annually. Also it is recommended that you call three contractor to get competitive pricing.
Frequently Asked Questions
What is a Cross Connection?
A cross connection is any connection between a non-potable water source (non drinking water) and a potable water source (drinking water).
What is Backflow?
Backflow is the reversal of water flow in a water system.
Device Testing FAQ
Is it requried to test my device annually?
Yes according to the manufacturer it is requried to test the device annual
What types of devices must be tested?
Any devices that are testable.
What if I choose not to use my lawn irrigation system this year?
If you choose not to use your lawn irrigation system you must inform CCRA Professional Services. By Email at firstname.lastname@example.org or by phone.
When is it required to have my device tested for my lawn irrigation system?
It is required to have your device tested at the time of install or in the spring when it is reinstalled before normal use.
What is testing frequency of testable backflow devices?
The required testing frequency is annual per the manufacturers recommendation.
Why must my device be tested?
Testable devices have springs and seals built into them which can lose tension and breakdown over time causing the deive to not function properly during a backflow event.
What does testing a device show?
Testing a device shows that during a backflow event the device would function properly protecting the water system.
Who can test my device/s?
Only certain licensed testers can test devices, they also must be regestered with CCRA Professional Services. To view a list of verified tester click here.
WUI (Survey) FAQ
Is the Water Usage Inventory (WUI) Survey Required
If you recived notice from your water authority to complete your WUI Survey then yes it is requried to be completed.
Where do I located my account number?
It will be the same number your water bill, also the letter that you receive has the account number in the upper right corner.
I have entered in my water account number, but it will not accept my number. How to I proceed?
Ensure that you are entering the number in correctly, the number you should enter is on the survey letter you received from your water provider.
I think I already completed my water survey, is there a way I can check?
Go to ccra4safewater.com, click on take your survey, select your municipally, and enter your water account number. If you have completed your survey a message will appear saying “Your Survey is Complete”.
What is the purpose of completing the water survey about my property?
The purpose of completing your water survey is to locate any types of dangerous connections that could cause a cross contamination incident if there was a backflow incident in your municipality.
Who can complete the water survey for my property?
Anyone with knowledge of the property or someone that can walk around the property to answer the questions from the water survey.
How long does the WUI survey take?
3-5 minutes for the average homeowner
What types for questions are on the WUI survey?
General questions about hyour water system on the property.
Do you need mechanical knowledge to complete the water survey?
No, the average homeowner can complete the survey. There are pictures on certain questions to help make the survey easier to complete and less confusing.
I do not have computer access how do I complete my survey?
There are paper water surveys available through your water provider or the managing company.
What is the WUI Survey?
The WUI Stands for Water Usage Inventory this survey is designed to help protect water systems from dangerous cross connections. Overtime many things change in the water system different businesses move in and out and people make different changes to their water system on their property. These changes can cause a cross connection without the knowledge of the property owner. The survey is a short online questionnaire with pictures to help you to understand what the question is asking, completing the survey takes under 10 minutes with most surveys taking less then 5 minutes.
Why Complete my WUI Survey?
If you received a notice to complete your WUI survey, its not only required to complete your survey, buy your local municipalities code but it helps to protect your drinking water. Completing your WUI Survey will allow CCRA's Software to automatically review and assign a ranking, suggesting any remediations that will make your property safe to the water system. The overall idea to remember is "it's not what you are doing with your water it's what your neighbor is doing with their water".